• Why do a salt spray test?
  • It is often seen in life that some metal objects become rusted and mottled after a long time, which is annoying...

    Whether a product is resistant to corrosion is related to the length of its life cycle.A product that can adapt to the natural environment, corrosion-resistant and durable will be more popular.

    The importance of the salt spray test is reflected in the assessment of the salt spray corrosion resistance of the product or metal material, and the judgment of the salt spray test result is the judgment of the product quality. Whether its judgment result is correct and reasonable is a correct measure of the product or metal resistance. The key to the quality of salt spray corrosion.Compared with the natural environment in artificially simulated salt spray environment, the salt concentration of chloride in the salt spray environment is several times or tens of times that of the general natural environment salt spray, which greatly increases the corrosion rate of the tested products. And the results of the time can also be greatly shortened.For example, if a product sample is tested in a natural exposure environment, it may take a year or even several years to wait for it to corrode, while in the artificial simulated salt spray environment, it only takes a few days or even a few hours to get similar results. 

    In the specific product production process, which products need to be tested for salt spray?

    A.Metal coating: Metal coating: electroplating, electroless plating, ion plating, sputtering, hot dip plating and chemical vapor deposition(Commonly used electroplating layers are galvanized, copper-plated, nickel-plated, chrome-plated, tin-plated, brass-plated and lead-tin alloy, etc.)

    B.Organic coating: paint, varnish, powder coating, anti-rust oil, etc.

    The 600L PVC Salt Fog Corrsion Test Chamber Environmental is for a variety of materials surface treatment, including coatings, electroplating, organic and inorganic film, anode treatment, anti-rust oil and other anti-corrosion treatment to test its corrosion resistance, thus establishing the quality of the product.It’s  Imported gray P.V.C board system, special treatment corrosion resistance. Plastic V-shaped frame and stainless steel tube corner objects, to ensure that the sample into a 30-degree angle, four-wheel sliding, movable.It meets standards with ASTM B117,ISO3768,CNS3627,Z2371, 3885, 4159, 7669, 8886, JIS Do201, H8502, H8610, K5400, 3769, 3770, 9227, and B268.

    The volume of the Salt Fog Corrsion Test Chamber is 600L.