Why are they all sourcing Sharp Point Tester & Sharp Edge Tester?
In the past two days, we have received a lot of inquiries about Sharp Edge Tester & Sharp Edge Tester, and the delivery time is relatively urgent, but fortunately, we have these two products in stock, which can meet the needs of customers in time.
Why is each type of product phased? Is a certain product in particularly high demand during a certain month? I think this is because the local market has discovered new business opportunities or the local strict control of the quality of a certain product.
Did you discover any new business opportunities?
The Sharp Point Tester is used to determine whether accessible sharp points on toys are likely to cause injury. If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.
The Sharp Edge Tester is used to determine whether accessible edges on toys are likely to cause injury. A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.
Both the Sharp Point Tester & Sharp Edge Tester meet standards with 16 CFR 1500.48, ASTM F963 4.8, EN-71 1998 8.2, and ISO 8124.
Sharp Edge Tester operation video link:
https://youtu.be/dQZQHH2peHM
Please review the video of the Sharp Point Tester operation as below link:
https://youtu.be/OFkLXTdf5rY
[email protected] 
[email protected]
skylineinstruments
