• Site:Home > Leather and Footwear Testing Instruments > SL-L02 Taber Abrasion Tester
  • Product Images
  • SL-L02 Taber Abrasion Tester

    SL-L02 Taber Abrasion Tester

    SL-L02 Taber Abrasion Tester

  • detailed description
  • Taber Abrasion Tester

    Product Introduction

    This tester applied to do the test of wear-resistant in skin, leather, cloth, paint, paper, flooring, plywood, glass and natural rubber. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased, Specimen to be removed after rotation to reach a certain number, observe the condition of the specimen or compare the weight with the previous material's, For the choice of grinding wheel models: H18, H22, CS17, S32, S33.

    DIN-53754, 53799, 53109, 52347, TAPPI-T476, ASTM-D1044, D3884, ISO-5470
    Applicable industry:
    It is used in testing the performance of leather products, such as suitcases, carpets, cardboard, clothing, glass, plastic coating, ceramic tile, metal plating, paints, varnishes, decorative sheets, high-pressure sheets, plastics, textiles, flexible floor mats, traffic paint, anodizing layer, blankets, electronic components, decorative plates, wax, label, leather, dental materials, car ornaments, resin, furniture, and scientific research laboratories; Commodity inspection, arbitration, and technical supervision departments,

    The Formula is
    Abrasive index formula: × 1000
    Testing reference:
    Paint  brick  plywood  plastic
    CS17  CS17  S32
    S33  CS17

    Technical parameters

     Specimen  120 × 6.5 × 3mm 
     Load  250g, 500g, 1000g 
     Counter  6 digit electronic display, automatic shut down 
     Testing Disk Speed   0-70 Adjustable 
     Machine Dimensions  30 × 43 × 30cm 
     Machine Weight  30kg 
     Attachment   A wrench, a group of grinding wheel, Fama (250g, 500g, 750g) each 2 PCS. Vacuum cleaner 1
     Power supply  AC220V/50Hz

    What is a Taber abrasion test?

    Taber abrasion is a test to determine a plastic's resistance to abrasion. Resistance to abrasion is defined as the ability of a material to withstand mechanical action such as rubbing, scraping, or erosion. Abrasion can be difficult to compare but haze variation or weight loss are often evaluated.


    How abrasion test is done?

    A typical Taber abrasion test consists of a disk-shaped specimen that is placed in constant contact with an abrasive wheel, using predetermined forces to a specified number of cycles to determine wear. The most commonly used standards for these tests are: ASTM D4060, ASTM F1978-12 and MIL-A-8625

  • Related ProductsMore>>