ASTM Tumble Test Steps For Wheeled Toys

Product Description

It is used for Tipover Test for Large, Bulky Toys—Large, bulky

toys shall be tested for impact by tipping over three times, one
of which is in the worst attitude by pushing the sample slowly
past its center of balance onto the impact medium described in
8.7.3

Standard :ASTM F963 

Technical Parameters

 “A” shall be not less than 3ft (9.4mm)

“B” shall be not less than 7in (180mm)
“C” shall be not more than 9 in (230mm)

6 wooden steps

What are some tests used to ensure the safety of toys?

These include an “impact test” to make sure no small parts fall off when a toy gets knocked around; a “tumble test” for wheeled vehicles, during which testers push them down a short flight of stairs; and a “tension test” to make sure stuffed animals or beanbag toys don't come apart at the seams.